24V 8 Channel Industrial Radio Remote Control for construction equipment, EOT crane, Sany Crane,Cat crane, tadano crane, XCMG crane, street crane, Kato crane
Standard Configuration:
1. One transmitter;
2. One receiver;
3. One 1m cable connect with receiver
4. One operation and maintain manual.
Feature:
1. With 8 function buttons and 1 Start button
2. Control contact is up to 15
3. With Battery voltage warning device, the power supply is cut off during low power
4. Program the button function by computer software
5. Safty key prevents from unauthorized user.
6. Up/down can be programmed to interlock or non-interlock,toggle and normal etc.
7. Start button can be program to be start, Normal, toggle function etc.
Our Advantage:
1. More than 10 years researching and exporting experience in Radio Remote Control industry.
2.More than 20 people R&D working team, have the ability to research and develop new product independently.
3. Have 15 production lines. we also have many production machines such Printing circuit board machine, SMT machine, automatic wave soldering machine, automatic soldering robot, etc. also have many testing machine.
4. Well and high quality control, all working process according to ISO9001:2008.
5. CE, FCC & ISO certificates.
6. OEM acceptable
Brief Introduction:
Transmitter: size:239x65x65mm weight:255g
Receiver: size:200x165xx227mm weight:1400g
Specification:
TX Model | F24-8D-TX-V-(E) |
TX Size | 239x65x65(cm) |
TX Weight | about291g(without Batteries) |
Housing Materail | glass fiber-reinforced nylon-6 |
Protection Degree | IP65 |
Temperature Rating | -35°C ~ +85°C(Regardless of the battery temperature tolerance) |
TX power Supply | Two 1.5 volts Batteries(AA Size) |
Number of buttons | 8 double speed buttons,1 START button,1 mushroom button |
Button Marking | arrow tip |
I.D.Code | 4.3 billion |
Voltage Warning | TX Red LED will flash slowly when the volts under 2.2V,and unable to start TX under 1.8V. |
Operating Frequency | 310.0325-331.165MHz or 425MHZ-441MHZ |
Channel Spacing | 0.2675MHz |
Channel | 80CH |
RF Power | <10DBm |
Fault Detection | TX Red LED is flashing quickly: 1.Not in the correct way to start; 2.One of the pushbutton is jammed. TX LED will flash slowly: 1.Please change two new batteries |
Application:
Widely applied for lifting equipment, construction machinery, cargo loading/unloading machines, water supply system, data transmission, the iron-smelting and steel making, the automobile manufacturing, paper making and chemical industry, steel structure processing, galvanization, shipbuilding, railroad, bridge, tunnel construction and other equipment and sites which can be worked by radio controls.
Safety features
1.Unique 4.3 billion ID code
2.Hamming code
3.Enhanced watch-dog circuit
4.With FCC and CE certificate
Package
1 set per box, 6 pcs per carton.
Company Picture:
Welcome to send your question or information to me, all of your question will be reply within 12hours.