XCMG Brand New Official 50 Ton Qy50ka Hydraulic Heavy Lift Mobile Truck Crane.
XCMG QY50KA truck crane's structure is compact, the industry operating performance is the highest. Lifting performance and driving performance of a comprehensive upgrade, leading competitors. Dual-pump confluence technology, operating efficiency of a comprehensive lead.
Advantages and Highlights:
1. Leading lifting and driving performances
Five section U-type booms. The boom length is 11.4m-43.5m with strong lifting performance, leading 5%-10% ahead of products with the same tonnages in the same industry.
High-power engine with good dynamic performance, strong gradeability and superior trafficability. The maximum gradeability and maximum travel speed respectively are 42% and 85km/h.
2. Reliability of heat dissipation, electrical system etc. has been improved with safer operation and driving
Waterproof connector clip is equipped with rubber sheath inside with excellent water impervious and level of protection reaches to IP65.
The air-conditioning condenser is separately installed, the heat-sinking capability is sharply improved and the environment temperature reached to more than 45ºC.
3. Mature and reliable double-pump confluence technique, maintaining the advantages of efficient operation
The double-pump confluence technique is adopted in raising and falling of winch, extending and retracting of lazy boom and luffing, leading ahead of luffing and extending and retracting operations.
4. Air-aid shift gears and 45% of shifting force is reduced
The boost system will work only by stepping on the clutch that effectively avoids gearbox damaging gears when shifting. Compared with the same industry, 100mm distance of shift gears and 45% of shifting force are respectively reduced.
.Main Technical Data Table in Travel configuration
| Description | Unit | Parameter value | |
| Overall length | mm | 13930 | |
| Overall width | mm | 2780 | |
| Overall Height | mm | 3630 | |
| Axle base | 1st ,2nd axle | mm | 1470 |
| 2nd ,3rd axle | 4300 | ||
| 3rd ,4th axle | 1350 | ||
| Wheel Base | mm | 2304+2075 | |
| Front overhang/rear overhang | mm | 2389/2064or 2376/2064 | |
| Front extension/rear extension | mm | 2131/226 or 2144/226 | |
| Total vehicle mass in travel configuration | kg | 42200 | |
| Axle load | Front axle | kg | 16200 |
| Rear axle | 26000 | ||
| Engine Model | WD615.338 | ||
| Engine rated power | kw/(r/min) | 276/2200 | |
| Engine rated torque | N.m/(r/min) | 1500/1300-1600 | |
| Max. travel speed | km/h | 85 | |
| Min. steady travel speed | km/h | 2~3 | |
| Min. turning diameter | m | 24 | |
| Min. ground clearance | mm | 327 | |
| Max. grade ability | % | 42 | |
| Approach angle | ° | 19 | |
| Departure angle | ° | 15 | |
| Braking distance (at 30 km/h, full load ) | m | ≤10 | |
| Oil consumption per 100km | L | 40 | |
| Exterior noise level during acceleration traveling | dB (A) | ≤88 | |
| Noise level at seated position | dB (A) | ≤90 | |
.Main Technical Data Table for Lifting Operation
| Description | Unit | Parameter value | |||
| Max. total rated lifting capacity | t | 50 | |||
| Min. rated working radius | m | 3 | |||
| Turning radius at turntable tail | mm | 3800 | |||
| Max. load moment | Base boom | KN.m | 2009 | ||
| Fully-extended boom | 1129 | ||||
| Outrigger span | Longitudinal | m | 6.1 | ||
| Lateral | 7.1 | ||||
| Hoist height | Base boom | m | 11.9 | ||
| Fully-extended boom | 44 | ||||
| Fully-extended boom + Jib | 58.1 | ||||
| Boom length | Base boom | m | 11.4 | ||
| Fully-extended boom | 43.5 | ||||
| Fully-extended boom + Jib | 59.5 | ||||
| Jib offset angle | ° | 0, 15, 30 | |||
| Time for boom raising | s | ≤40 | |||
| Time for boom extending fully | s | ≤90 | |||
| Max. slewing speed | r/min | ≥2.0 | |||
| Outrigger extending and retracting time | Outrigger | Extending | s | ≤35 | |
| Simultaneously | |||||
| Retracting | ≤30 | ||||
| Simultaneously | |||||
| Outrigger | Extending | ≤40 | |||
| Simultaneously | |||||
| Retracting | ≤35 | ||||
| Simultaneously | |||||
| Hoisting speed | Main winch | No load | m/min | ≥130 | |
| (single line | Auxiliary winch | No load | ≥130 | ||
| Exterior noise level | dB (A) | ≤118 | |||
| Noise level at seated position | dB (A) | ≤90 | |||
FAQ
1: What kind terms of payment can be accepted?
A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted
2: What certificates are available in Machinery?
A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC,
3: What about the delivery time?
A: 30 days after receiving the deposit.
4: What about the warranty time?
A: 12 months after shipment or 2000 working hours, whichever occuts first.
5. What about the Minimum Order Quantity?
A: The MOQ is 1 pcs